Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tarzana
Gate parts and welding in Tarzana comes down to one question: can the company handle the hillside? Most of the calls we take from the 91356 and 91357 ZIP codes involve gates that were put in years ago and are now fighting the slope south of Ventura Boulevard. A hinge that worked fine on flat ground in Encino will fail in Tarzana because the post is carrying thousands of pounds of continuous lateral pull. We answer the phone at (925) 590-4289 and we fix that problem correctly the first time.
If your gate sags, binds, or drags on a Tarzana driveway, the repair is rarely an off-the-shelf part swap. It is usually a weld and footing job dressed up as a hinge. We have been doing this work for over 42 years, and we know exactly what Tarzana’s terrain does to steel. Call us for a free estimate. The price gets settled before any work begins.
Why Ironworks Gate Co. Is Tarzana’s Preferred Gate Parts & Welding Company
We are not the cheapest bid in Tarzana, and we do not try to be. Homeowners here have lived in their homes for twenty years or more. They have been let down by contractors before, and they are not shopping around for a bargain on a gate that secures their property. They want it done once, done correctly, and guaranteed in writing. That is the customer we work for.
Victor Salinas leads our team, and every job goes out under the same standard: the 90-Day Done Right Promise. It is written, it is simple, and there is no paperwork to file if something is not right. We come back and make it right. No arguing. Every single job, from a hinge replacement to a full post reset, carries that promise.
Our crews are background-checked and uniformed. They work on Tarzana properties the way they would work on their own mother’s house. And when you call, a live person answers, 24 hours a day, 7 days a week. No voicemail trees, no answering service, no waiting until Monday.
Our Gate Parts & Welding Services in Tarzana
Our Gate Parts & Welding team handles the full scope of repair and fabrication work on driveway and estate gates. In Tarzana, three services matter most: post replacement, hinge replacement, and custom welding. Here is what each one actually involves on a hillside lot.
Hinge Replacement
On a flat street in Winnetka, a hinge swap is a bolt-off, bolt-on job. In Tarzana’s hillside neighborhoods south of Ventura Boulevard, the hinge post carries continuous lateral load from the gate’s weight pulling downhill. That load can exceed what the original post was ever designed to hold. Hinge replacement here means checking the post for lean, checking the footing for movement, and welding a hinge assembly that distributes the load instead of concentrating it. We see this constantly on the 1970s-1990s ornamental gates in the custom estates south of the Boulevard.
Post Replacement
A leaning post on a steep Tarzana driveway will not be fixed by shimming or tightening bolts. The post has to come out. We cut it free, excavate the old footing, pour a new engineered footing sized for the gradient and gate weight, and set a new post in place. The difference is stark: a gate that sagged and bound the latch for years will swing true and close cleanly. Post replacement is a structural repair, not a cosmetic one, and it has to be treated that way.
Rail Repair
Slide gates on Tarzana homes take abuse in the summer. The San Fernando Valley heat regularly pushes past 100°F, and steel slide tracks expand enough to throw the gate out of alignment. The rail then binds, the operator motor overheats, and the rack and pinion teeth can strip. We repair or replace bent and warped rails, realign the track, and check the operator load so the motor is not fighting the metal every afternoon. On a sloped driveway, the rail has to be set to account for thermal expansion, or the same failure returns in six months.
Custom Welding
Broken scrollwork, cracked weld joints at the hinge, bent panels from Santa Ana gusts - these are repairs that need a welder, not a parts catalog. Our crew welds on-site when the damage is contained, and we fabricate replacement sections when a piece of ornamental iron is missing entirely. We match the existing steel profile, weld it in, and grind and finish the joint so the repair disappears into the gate. For older wrought-iron gates on Tarzana’s custom estates, this is the only way to keep the original look without replacing a whole panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
Our technicians are trained and equipped on nine gate-automation brands, including BFT, Linear, and Viking equipment that is common on Tarzana’s older automated estate gates. Whatever is on the driveway, we have seen it and we carry parts for it. That means most Tarzana repairs are completed in a single visit, with the correct fix made the first time. We do not guess at the problem and we do not sell you a part you do not need.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Hinge posts shearing or leaning on steep driveways. The continuous downhill torque of a heavy swing gate stresses the post and footing constantly. Over years, the post leans, the gate sags, and the latch binds. This is the single most common repair in Tarzana.
- Slide gate rails binding in Valley heat. When the temperature climbs past 100°F, the steel rail expands and the gate drags. The operator motor then overheats trying to push it. Left alone, this strips rack and pinion teeth and burns out the motor.
- Santa Ana wind damage. Gusts slam unsecured gates and bend the panel or crack the weld where the hinge meets the frame. We see this most often on gates without proper stops or wind bracing.
- Original 1970s-1990s operators reaching end of life. South of Ventura Boulevard, the larger custom estates are hitting the point where original gate automation is failing. The operator dies, and the homeowner is left deciding between a repair and a full replacement. We can walk through both options honestly.
We routinely see out-of-area gate companies install operators sized for flat driveways on Tarzana hillside properties. The motors fail within 12 to 18 months under the uphill torque load. Replacing an operator another contractor installed is one of the most common service calls our Tarzana techs make.
Pricing for Gate Parts & Welding in Tarzana, CA
Gate parts and welding in Tarzana runs a wide range because a hinge replacement on a flat lot is a different job from a post replacement on a hillside. Here is what you can expect in the current market:
- Hinge replacement on a standard gate: typically $180 to $480 per hinge depending on gate weight and access.
- Hinge post replacement with engineered footing on a hillside driveway: $900 to $2,400 pending the depth of the old footing, gate weight, and concrete work.
- Slide rail repair or replacement and realignment: $350 to $900 for most residential gates.
- Custom welding repair for a cracked joint or broken scrollwork: $150 to $600 depending on the extent of fabrication and finishing work.
Every job gets an upfront price before any bolt is turned. The quote is the quote. If the scope changes, we stop and talk to you first. You can reach us at (925) 590-4289 for a free estimate. Ask about our senior and veteran 5% discount, our $50 off any repair over $250, and our free second opinion on any written estimate from another company.
We Also Serve Cities Near Tarzana
If you are outside Tarzana proper, we regularly work in Tarzana‘s neighboring communities: Encino, Reseda, Winnetka, and Northridge. The metal ages the same way in the western Valley heat, and the fix is the same: proper welding, proper footings, and parts that last. Give us a call and we will get a truck to you.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
Because the post is holding a continuous lateral load that flat-ground installations never see. On a steep driveway south of Ventura Boulevard, the gate’s full weight pulls downhill against the hinge post at all times. The original post footings on most Tarzana gates were never sized for that gradient. Over years, the post starts to lean, the gate sags, and the latch binds. The fix is not always a new hinge. It is often a new post and footing. Call (925) 590-4289 and we will tell you honestly which one you need.
Yes. If the missing piece is small enough to reproduce in our shop, we fabricate a matching section, weld it in place, and grind and finish the joint so it matches the original steel. On most Tarzana estate gates from the 1970s through 1990s, the ornamental profile can be matched. We have done this on gates with missing scrollwork, bent pickets, and cracked hinge welds all across the 91356 and 91357 ZIP codes. Estimates are free.
Probably the rail has expanded in the heat, or the support has shifted on the slope. In the western San Fernando Valley, summer temperatures routinely exceed 100°F, and a steel slide rail will expand enough to throw alignment and bind the gate. The motor then overheats fighting the metal. We check the rail, the supports, and the operator load together, and we set the track to account for thermal expansion. That last step is what keeps the repair from failing again when the next heat wave hits.
It starts with cutting the old post free and excavating the existing footing. On a Tarzana hillside, we typically find the original footing was far too shallow for the load. We pour a new engineered footing sized for the gate’s weight and the driveway grade, set the post in it, and rebuild the hinge assembly so the load distributes correctly. On a hillside estate south of Ventura Boulevard, our crew reset a failing 1970s wrought-iron gate post sitting on an 18-inch-deep footing. We poured a 36-inch engineered footing, rebuilt the hinge, and the gate has swung true since. That is what a proper post replacement looks like.
Swing gates. The hillside terrain south of Ventura Boulevard stresses hinge welds and posts continuously, so cracked weld joints and leaning posts are far more frequent than slide gate failures. Slide gates fail more often from heat expansion and operator overload. Either way, the repair starts with a free estimate at (925) 590-4289, and the price is set before we start the work.
Contact Ironworks Gate Co. for Gate Parts & Welding in Tarzana
If your gate is sagging, binding, or cracked, call us at (925) 590-4289. We answer live, 24 hours a day. We will send a uniformed, background-checked technician to your Tarzana home, look at the damage, and give you a written price before any work starts. Free estimates, free second opinions on written estimates from other companies, and a 90-Day Done Right Promise on every job. Victor Salinas stands behind this work, and so do the 42-plus years we have been at it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana homeowners with gate parts and welding repair.