Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Reseda
Gate parts and welding in Reseda usually come down to one of two situations: a hinge that finally let go on a 1950s wrought iron gate, or a post that cracked behind a 1994 earthquake patch and has been slowly racking the gate ever since. We fix both, same week, with a written quote before any work starts. Ironworks Gate Co. has been repairing, rebuilding, and rehanging gates for over 42 years, and our crews know Reseda’s peculiar gate problems better than any general handyman. Call (925) 590-4289 and a live person answers, day or night.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Parts & Welding Company
Reseda homeowners keep our number because we tell them the truth about what a repair actually needs. A gate that drags on the driveway often is not just a hinge problem. It is a post that has gone out of plumb. We find that before we touch a bolt. Our background-checked, uniformed technicians work in Reseda every week, from the tract home blocks around Cantara Street to the courtyard apartments along Sherman Way, handling everything from routine fixes to full Gate Installation - Reseda projects. They know the 91335 and 91337 ZIP codes, the CMU block walls that define 1950s and 1960s lots, and the particular way a Santa Ana wind event punishes a gate stop. Most jobs are completed in a single visit, with the price settled up front and protected by our written 90-Day Done Right Promise.
Victor Salinas leads our gate parts and welding work. He has spent decades on exactly this kind of repair, and he trains every technician to the same standard: if it is not right, we come back and make it right. No paperwork, no argument. That is the Keystone Standard. Dispatch for Reseda is coordinated through our Los Angeles office, and crews roll directly to the neighborhood. We are not a one-truck outfit guessing at your gate. We are Gate Parts & Welding specialists.
Our Gate Parts & Welding Services in Reseda
Hinge Replacement
Most Reseda swing gates hang on barrel hinges or strap hinges set into CMU block or stucco posts. After thirty or forty Valley summers, the hinge leaves wallow out their bolt holes and the gate starts to drag or sag. We replace the hinge, but more importantly we inspect what it is bolted to. If the post face is crumbling from a 1994 quick-set patch, a new hinge bolted into that same crumble will fail again within a year. In Reseda we regularly add welded hinge post saddles or through-bolted plates to restore a solid mount.
Post Replacement
This is the repair we do more often in Reseda than almost anywhere else in the San Fernando Valley. The 1994 Northridge earthquake’s epicenter sat essentially within Reseda, and a huge share of the neighborhood’s concrete block pilasters were cracked, patched, or entirely rebuilt in the mid-1990s. Many of those post-quake repairs used quick-set concrete without adequate rebar tie to the original footing. Three decades of 100°F heat cycling and slow soil movement later, those pilasters crack and lean. We remove the old post, drill and epoxy full-depth rebar into the footing, pour a proper core, and rehang the gate so it clears its stop without dragging. This is foundation-level work, not a cosmetic patch.
Rail Repair
Slide gates take rail damage when posts settle or when the gate gets slammed by Valley wind. A bent or gouged rail forces the operator to work harder, which burns motors and strips rack teeth. On rail repair jobs across Reseda, we check the post alignment first. If the posts are still true, we straighten or replace the rail and reset the gate. If the posts have moved, welding a new rail onto a shifting frame just postpones the same failure.
Custom Welding
Some older Reseda gates deserve repair, not replacement. A 1960s wrought iron driveway gate with a snapped picket or a torn hinge strap can often be welded back stronger than new. We weld on-site, in place, with proper preheat where the old metal is brittle. For apartment and duplex gates along Reseda Boulevard that take commercial-level cycling on residential hardware, we frequently weld reinforcement plates at stress points before rehanging. This is the work our Gate Parts & Welding in Reseda crews do every week, and it is why homeowners stop calling handymen after the second failed patch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
Our technicians are trained and equipped on nine automation brands, including LiftMaster, FAAC, Elite, and DoorKing. When a Reseda homeowner calls with a slide gate that will not move, the fix is usually a board, a limit switch, or a stripped gear on the rack-typical issues our Reseda Gate Motor & Opener service handles. We stock the common parts locally for fast turnaround across Reseda, and we carry the oddball stuff too: older FAAC hydraulic brackets, DoorKing gearboxes, LiftMaster edge sensors. If your operator is obsolete and the board is no longer manufactured, we will tell you straight whether a rebuilt board is a wise spend or whether a new operator costs less in the long run.
Common Gate Parts & Welding Problems We See in Reseda Homes
- 1994 quick-set concrete crumbling around hinge bolts. The patch looks fine from the outside, but every Santa Ana slam shears a little more of the weakened edge. Eventually the hinge plate pulls free and the gate drops. We see this weekly in the tract-home blocks around the 91335 ZIP.
- Flat Valley heat depleting operator lubricant. Reseda routinely runs 10 to 15 degrees hotter than coastal Los Angeles. A Ghost Controls swing arm bearing that would last a decade in Santa Monica can seize in half that time here, and when it seizes it strips the rack on an older LiftMaster slide gate.
- Settled post-quake pilasters tripping safety photocells. A 1950s tract home’s wrought iron gate will rack as the post leans, and the beam breaks. Some homeowners bypass the photocell to stop the nuisance, which disables a required safety feature. The correct fix is re-setting the post, not bypassing the sensor.
- Obsolete control boards on 1990s and early 2000s operators. Many Reseda gates were automated in the decade after the quake. Those boards are now twenty to thirty years old, and when they fail the replacement part often is not made anymore. We explain when a retrofit board makes sense and when a new operator is the cheaper honest answer.
Pricing for Gate Parts & Welding in Reseda, CA
A typical hinge replacement in Reseda runs $180 to $320 per pair, including welded reinforcement plates where the post face needs it. Post replacement is a bigger job: $650 to $1,400 per post depending on footing depth, core fill, and whether we are reusing the existing gate or rehanging it fresh. Rail repair generally falls between $250 and $600. Custom welding work is quoted by the hour plus materials, and most Reseda weld repairs land between $150 and $450. A full Gate Parts & Welding diagnosis with a written quote is free. You will know the exact number before we start, and that number does not change at the end. Call (925) 590-4289 to schedule.
| Service | Typical Reseda Price Range |
|---|---|
| Hinge replacement (per pair) | $180 - $320 |
| Post replacement (per post) | $650 - $1,400 |
| Rail repair | $250 - $600 |
| Custom welding (hourly plus materials) | $150 - $450 typical |
What Affects the Price on a Reseda Gate Repair
- Post condition. If the post is still plumb and solid, a hinge replacement is quick. If it has a 1994 quick-set patch that has cracked, the job becomes a post replacement, and the price jumps accordingly.
- Gate weight and age. A light 1950s wrought iron gate welds quickly. A heavy 1970s steel gate with rust-thinned metal takes more time and may need plate reinforcement before welding.
- Access. Driveway gates are straightforward. Shared courtyard gates on Sherman Way apartment complexes sometimes require coordinating with a property manager and working around tenant schedules.
We Also Serve Cities Near Reseda
Ironworks Gate Co. serves the entire western San Fernando Valley. If you’re in Winnetka, Tarzana, Northridge, or Encino and dealing with a sagging gate, a stripped slide operator, or a post that will not stay plumb, call the same Reseda number and we will get a technician to you. The quake damage pattern does not stop at the Reseda city line; we see the same failing pilasters in the neighboring blocks.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Reseda
Because the previous repair likely addressed the visible crack, not the footing underneath it. After the 1994 Northridge earthquake, many Reseda posts were re-set with quick-set concrete and no rebar tie into the original footing. The new patch bonds to the old block but not to the foundation, so heat expansion, soil movement, and wind slams crack it at the same joint every time. A proper fix means drilling down into the footing, epoxying full-depth rebar, and re-coring the post. That is the standard we use on every Reseda post replacement. Call (925) 590-4289 and we will inspect the post for free.
Sometimes, yes. If the post is still plumb and the sag comes from a stretched hinge strap or a fatigued weld at the frame, we can weld the correction in place. But if the hinge post has moved even a quarter inch out of plumb, welding a sag correction onto the gate just transfers the load to a misaligned pivot, and the gate will bind again. In Reseda we always measure the post first. If it is off, the honest fix is resetting the post, not masking the symptom. A free inspection answers it for certain; call (925) 590-4289.
The stripping is usually a symptom. When a DoorKing slide gate repeatedly strips its rack and pinion, the gate is binding somewhere, and in Reseda that binding often traces back to a post that settled after the quake. On a duplex courtyard off Sherman Way near the 91335 side, our crew found a LiftMaster slide gate operator doing exactly this. The real cause was two hairline-cracked gate posts from the 1994 repairs, settling almost half an inch out of plumb. We welded new hinge post saddles, reset both posts with full-depth footing and rebar, and rehung the gate so it cleared its stop without dragging. The operator stopped stripping once the geometry was corrected. The fix for yours may be similar. Call (925) 590-4289 and we will diagnose it on-site.
Yes. Even if you are only repairing the gate structure, if an automatic operator is present, the safety photocell and reversing mechanism must remain functional under state and local code. On many old Reseda gates, the photocell was installed before the post shifted, and now the beam trips constantly. Some homeowners bypass it. We do not. When we re-set a post or rehang a gate, we realign or replace the photo eyes so the Gate Access Control in Reseda system works as designed. Safety is not optional on this work.
The post, by a wide margin. The gate panels on most 1950s and 1960s Reseda homes are wrought iron or steel, and they survive decades. The posts are the weak point. The Northridge quake cracked thousands of CMU pilasters in this neighborhood, and the hasty mid-1990s repairs are failing now. In Reseda we replace or re-core a post on roughly three out of four structural gate jobs, while the gate itself often goes back on reused hinges and keeps serving. If your gate looks like it is leaning or dragging, it is probably the post. We will tell you for sure with a free inspection. Call (925) 590-4289.
Contact Ironworks Gate Co. in Reseda
If your gate is dragging, sagging, binding, or simply not working the way it used to, call Ironworks Gate Co. today at (925) 590-4289. We provide free estimates, a written quote before any work begins, and the 90-Day Done Right Promise on every job. A live person answers 24 hours a day, 7 days a week. Ask about the $50 off any repair over $250, the free second opinion on any written estimate, the $89 seasonal tune-up, and our permanent 5% senior and veteran discount.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the surrounding San Fernando Valley.