Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
Gate installation in Reseda usually runs between $2,800 and $7,500 for a standard steel driveway gate with automation, and most jobs are bid within one business day of your call. We schedule a free on-site measure, write up a firm price before any work begins, and complete most single-gate installations in one visit. Call (925) 590-4289 and Victor Salinas will walk the job with you personally. You’ll know the price before we ever turn a wrench.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Installation Company
We’ve spent more than 42 years working on Valley gates, and Reseda’s specific problems show up on our job board every single week. This is the neighborhood where the 1994 Northridge earthquake centered, which means the gate posts here carry damage patterns most other parts of Los Angeles never see. Post-quake quick-set patches, cracked CMU pilasters, gates hung before modern safety standards existed. That’s our daily work in 91335 and 91337.
Our crews live in the area and know the neighborhood block by block. When a homeowner off Lindley Avenue calls about a sagging swing gate, we already know what we’re likely to find before we pull up: the post is out of plumb, the hinges are pulling from old mortar, and the opener is fighting a losing battle against a leaning column. That local knowledge means we fix the real problem the first visit, not just the symptom.
Every one of our technicians is background-checked and uniformed. They’re trained and certified on nine gate-automation brands, so whether your Reseda home has a LiftMaster, FAAC, or an older Mighty Mule opener, we know the equipment before we arrive. And every installation carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No arguing, no paperwork, no exceptions.
Our Gate Installation Services in Reseda
Driveway Gate Installation
A new driveway gate in Reseda typically runs $3,200 to $7,500 installed, depending on width, material, and whether you need automation. Most Reseda driveways are standard single-car or wide double-car openings along the 1950s-1970s tract home pattern, which keeps material costs predictable. We measure, weld, hang, and automate in one visit on most jobs, and we always quote the full number before starting.
Pedestrian Gate Installation
Pedestrian gates in Reseda usually cost between $900 and $2,400, including the post, panel, hinges, and latch hardware. These gates see daily use from kids, delivery drivers, and dog walkers, and the hardware has to hold up under real cycles. We build pedestrian gates with the same steel and welding standards as our driveway gates, because a gate that gets touched ten times a day fails faster than one that gets cycled twice.
Sliding Gate Installation
Sliding gates in Reseda start around $3,800 and run to $8,500 or more for longer spans with heavy steel and automation. They’re the right answer for Reseda driveways with limited swing clearance or sloping approaches, which we see frequently on the Sherman Way corridor where apartment and courtyard entries are packed tight. We handle the full installation: track, rollers, rack-and-pinion, motor, and safety photocells.
Swing Gate Installation
Swing gates remain the most common gate type in Reseda because they match the original wrought iron look of the 1950s-70s era homes. A new steel swing gate with a post and opener runs $2,800 to $6,500. Here’s the honest advice: in Reseda, the gate panel is rarely the real problem. The post it hangs on is. We install swing gates with properly rebarred footings, because we’ve pulled too many posts that were patched with quick-set after the ’94 quake and never tied back to the original footing.
Security Gate Installation
Security gates for Reseda properties run $4,000 to $12,000 depending on steel gauge, height, and access control options. We install keypad entry, intercom, and vehicle-loop detection on gates across 91335 and 91337. For homeowners who want the gate locked and controlled, we build it with the operator and safety edge integrated from the start, not bolted on as an afterthought.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We’re factory-trained and certified on nine automation brands, including Gate Installation systems from LiftMaster, FAAC, Elite, and Mighty Mule. That matters in Reseda because a lot of homes here have older openers from brands that date back decades, and the control boards are getting scarce. We keep common boards and safety-edge parts in stock for faster turnaround on Reseda jobs, and we know which older units can be retrofitted with modern entrapment protection and which are better replaced.
Common Gate Installation Problems We See in Reseda Homes
- Earthquake-patched pilasters cracking and settling. The Northridge quake centered essentially in Reseda, and a large share of local gate posts were reset with quick-set concrete in the mid-1990s. Thirty years of heat cycling and Valley soil movement later, those patches are failing, and gates are racking and binding on posts that have drifted out of plumb.
- Santa Ana winds bending hinges and stripping bolts. Valley winds funnel hard through Reseda and slam swing gates against their stops. We routinely find bent hinge pins and stripped bolts pulled clean out of aging CMU mortar on homes near Reseda Boulevard and Sherman Way.
- Older gate panels with no modern entrapment protection. Many Reseda gates were hung before UL 325 safety requirements existed. We retrofit older gates with photocells, contact edges, and current sensing where it’s practical, and we’re honest when a full replacement is the safer, cheaper long-term answer.
- Apartment and duplex entry gates wearing out residential hardware. Shared entry gates on the high-density corridors of Reseda Boulevard and Sherman Way cycle dozens of times a day. We install commercial-grade operators and reinforced tracks for these properties, because residential hardware simply doesn’t last under that load.
Pricing for Gate Installation in Reseda, CA
Here’s what you can expect to pay in Reseda right now. A basic steel pedestrian gate: $900-$2,400. A single swing driveway gate with automation: $2,800-$5,500. A double swing or wide sliding gate: $3,800-$8,500. A full security gate with access control: $4,000-$12,000. Post replacement or foundation repair adds $600-$1,800 per post when quake damage is present, which is more common in Reseda than in neighboring Canoga Park or Van Nuys.
What affects your number: gate width, steel gauge (we recommend 14-gauge minimum for security gates), whether you need the power run extended to the operator, and whether your existing post is sound. We quote the complete job in writing before any work starts, and that’s the price. No surprises on the bill. Call (925) 590-4289 and we’ll send a technician to measure your Reseda driveway at no charge.
We Also Serve Cities Near Reseda
We install gates throughout the West Valley, including Reseda and the surrounding communities of Winnetka, Tarzana, Northridge, and Encino. If you live just over the line in any of those neighborhoods, the same crew and the same 90-Day Done Right Promise apply to your job.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Sagging almost always traces back to the post, not the panel. In Reseda specifically, a high percentage of gate posts were reset after the 1994 Northridge earthquake using quick-set concrete without rebar ties to the original footing. Three decades of Valley heat and soil movement later, those posts are out of plumb, and any new panel hung on them will sag within months. The fix is a properly rebarred footing and a plumb post. Call (925) 590-4289 and we’ll tell you if your post can be saved or needs full replacement.
In many cases, yes. Older LiftMaster, FAAC, and Elite operators can be retrofitted with current-sensing technology, photocells, and contact edges to meet modern UL 325 safety requirements. We evaluate the board, wiring, and motor condition on site. If the control board is obsolete and replacement parts are no longer manufactured, a full operator replacement is usually cheaper than chasing used boards. Estimates are free.
No, it’s not normal, and it’s usually fixable. Santa Ana winds push fine dust and debris into the track and rollers, and they also rack the gate frame slightly against the rail. We clean and realign the track, replace any bent rollers, and verify the rack-and-pinion mesh. On Reseda homes where this recurs every wind season, we recommend upgrading to sealed bearing rollers. Call us and we’ll inspect it in person.
If the post was patched with quick-set after the ’94 quake and it’s now cracked or out of plumb, replacement is the honest answer. Patching a failing post just buys you another season or two before the gate binds again. A new post with proper rebar ties to a new footing runs $600-$1,800 per post in Reseda, and it’s the difference between a gate that works for five years and one that works for forty. We’ll give you a straight answer either way.
For Reseda’s flat Valley heat, where summer temperatures routinely pass 100°F, we recommend operators with metal gear drives and sealed electronics rated for high heat. LiftMaster and FAAC both make units that hold up well in continuous sun exposure, and we stock parts for both. Avoid operators with plastic gear trains; the heat shortens their lifespan measurably here. We’ll match the operator to your gate’s weight, cycle rate, and sun exposure at no charge.
Call Ironworks Gate Co. for Gate Installation in Reseda
You’re not just buying a gate. You’re fixing a problem that’s been building under your driveway for thirty years. We started in 1984, and we plan to be in the Valley another forty, standing behind every job we hang. Call (925) 590-4289 for a free on-site estimate. Someone answers the phone 24 hours a day, 7 days a week. And the price we quote is the price you pay. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Reseda and the San Fernando Valley.