Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank runs $2,800 to $9,600 for a typical residential driveway gate, with most standard steel or aluminum swing and slide gates landing between $3,400 and $5,800 including operator, posts, and hardware. Our crews live with the specific conditions that shape this city: Santa Ana gusts that twist under-built posts, 1940s bungalow lots too narrow for a standard slide track, and studio-adjacent streets where gates cycle hundreds of times a day. That local knowledge changes how we spec the post footings, the operator, and the gate itself. If your gate is sagging, binding, or simply done, call (925) 590-4289 and we’ll quote the job before any work begins.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Installation Company
We’ve hung, welded, and automated gates across Burbank long enough to know the difference between a job that holds up and a job that quietly fails. Homeowners here tend to stay put. The same 1940s bungalow in 91501 or 91502 that Lockheed workers bought seventy years ago is now owned by someone’s parents or grandparents, and the gate still matters to them. They remember the last contractor who cut a corner. We don’t.
Victor Salinas runs Ironworks Gate Co. with a steady hand and a simple rule: the 400th job gets the same care as the first. Our background-checked, uniformed technicians work in your driveway the way they would work in their own mother’s. Every completed job carries the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing.
We built our reputation on the Olive Avenue and Alameda Avenue corridors where studio perimeter gates cycle 300 to 500 times a day. That is not residential-grade work. It is the kind of industrial repetition that burns through cheap operators in months, and the crews who survive that environment become better at every gate they touch after it. Dispatch and scheduling coordinates from our Los Angeles office, and our technicians serve Burbank locally. A live person answers the phone 24 hours a day, seven days a week, at (925) 590-4289.
Our Gate Installation Services in Burbank
Driveway Gate Installation
Most Burbank driveway gates are swing gates, and most of them were installed decades ago on posts that were never meant to hold a solid steel infill against 60-mile-per-hour Santa Ana gusts. We pull the old posts, pour footings to depth with rebar, and hang a gate that closes square and stays that way. On narrow 1940s and 1950s lots where a standard slide track cannot fit, we build custom tracked solutions that work with the space you actually have, not the space a catalog assumes.
Pedestrian Gate Installation
The side-yard gates on Burbank’s post-war bungalows are often original wrought iron or steel tube, and most have sixty years of weather working against them. We fabricate and hang pedestrian gates matched to the existing fence height and style, with self-closing hinges and an optional latch or lock. In 91501 and 91502 especially, we set posts deep enough that winter saturation in the sandy loam does not heave the gate out of alignment before spring.
Sliding Gate Installation
Burbank is slide-gate country, largely because of the studios. Wheels, rack and pinion, cantilever rollers, and high-cycle operators are all part of our regular work here. For residential jobs we use operators from BFT and LiftMaster with duty cycles appropriate to the actual gate; for studio-perimeter and facility swing gates we spec vehicle-rated hardware and operators that will not blow through their gears in a year. Proper rack alignment is not optional on a slide gate. We get it right the first visit.
Swing Gate Installation
A swing gate is only as good as its hinge posts. In Burbank, the wind decides what good means. We oversize posts and footings for solid infill panels and use adjustable hinges that let us re-plumb after the ground shifts. Our Gate Installation team has repaired enough wind-twisted gates in this city to know exactly where the weak points are before they fail, not after.
Security Gate Installation
Between residential privacy gates in the hills and vehicle-rated perimeter gates on production facilities, Burbank has a real appetite for security. We install steel security gates with locking hardware, keypad access, and operators from Viking and Linear where reliability matters more than appearance. A security gate is only secure if it is anchored, aligned, and automated correctly. That is our work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
Our technicians are trained and equipped on nine major gate-automation brands, and in Burbank we find ourselves working most often with LiftMaster, BFT, and Viking. We also carry parts for Linear and Ghost Controls so that a common failure does not turn into a two-week wait for a board. That part-ready approach matters when your gate is the only way in and out of the property. We do not sell you a brand; we install the brand that fits the gate, the cycle count, and the wind exposure.
Common Gate Installation Problems We See in Burbank Homes
- Santa Ana wind damage to swing gates. Gusts of 50 to 70 miles per hour push a solid infill panel far beyond what a standard residential hinge post can take. We regularly see posts pulled out of plumb and welds cracked along the hinge line on original 1940s gates in 91501 and 91502.
- Post footings heaved by winter rain. The sandy loam around Burbank footings absorbs water quickly, and when it dries the ground moves. That shifting is often just enough to trip the safety photocell or bind the latch, and the gate stops closing fully.
- High-cycle slide gate failures on studio perimeters. Along Olive Avenue and Alameda Avenue, gates open and close hundreds of times a day. Residential operators and light-duty rack strip teeth fast. This is a specialized, recurring repair pattern we handle constantly.
- Narrow-lot retrofits gone wrong. A 1950s Burbank lot often has no room for a standard slide track. We fabricate custom track work and choose operators that fit the actual dimensions, rather than forcing a solution that shaves inches off the driveway.
Pricing for Gate Installation in Burbank, CA
Residential gate installation in Burbank typically runs $2,800 to $9,600. A basic single-swing driveway gate with a chain-drive operator starts around $3,200 to $4,500. A double swing gate with a belt-drive operator and steel infill runs $4,800 to $7,200. Slide gates generally cost $4,500 to $9,600, reflecting the track work, the heavier operator, and the more involved foundation. Security gates with access control fall on the upper end. Every quote is written, and the price is agreed before any work starts. You will not see a larger invoice at the end. Call (925) 590-4289 and we will measure, spec, and price your gate honestly.
We Also Serve Cities Near Burbank
Our Gate Installation in Burbank service extends to nearby communities including North Hollywood, Sun Valley, Studio City, and Van Nuys. The same technicians, the same written guarantee, and the same live phone support. If you are a few blocks over the Burbank line, call and we will come.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
Wind load is the single most important factor for solid infill gates on Burbank’s older lots. A standard panel on a light steel frame cannot hold up to the 50 to 70 mile per hour gusts that come down through the canyons every fall. We recommend either a vented or picket-style gate for solid panels, or we upsize the posts, hinges, and frame gauge to carry the wind. The price is quoted and agreed before any work starts. Call (925) 590-4289 for a site assessment.
We pour gate post footings to a minimum of 36 inches in Burbank’s sandy loam, and 42 to 48 inches for heavy gates or solid infill panels that catch the wind. The saturated ground in a wet winter heaves shallow footings enough to misalign a gate within one season. A deeper footing with rebar reinforcement is the only way to keep the gate square through the rain years.
Yes, in most cases. The narrow lot widths common in 91501 and 91502 do not kill a slide gate; they just call for a different track solution. We build custom steel track beds that bolt along the fence line and use a cantilever or a low-profile roller system instead of a full ground track. The gate itself is fabricated to the exact available width. We quote it after measuring, and the number on the quote is the number on the invoice.
Pull the manual release handle, which is the small lever on the operator body, and push the gate by hand. Do not force the gate through the operator with the release engaged. Once power returns, run the gate through a full open and close cycle so the release re-engages correctly. If the release handle is stuck or the gate will not re-engage, call (925) 590-4289 and a technician will sort it out.
Because they cycle 300 to 500 times a day. A residential operator rated for 20 cycles a day simply cannot survive that duty. We spec studio and production facility gates with high-cycle operators from BFT, LiftMaster, or Viking, and we reinforce the rack and pinion alignment so the teeth do not strip. A facility manager on Olive Avenue should never be stranded at shift change because of a $400 residential board. Our team handles those installs and repairs daily. Call (925) 590-4289 for a commercial gate assessment.
Schedule Your Burbank Gate Installation
We measure, we quote, we build, we hang. The gate is square, the operator is rated for the actual use, and the post footings are deep enough for this soil and this wind. If the job is not right, the 90-Day Done Right Promise puts it in writing that we will return and fix it. Call (925) 590-4289 for a free estimate, a free second opinion on any written quote, or just to talk through the options. A live person answers, day or night, and the consult costs nothing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank and the San Fernando Valley since 1984.