Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Van Nuys
Gate installation in Van Nuys runs $3,800-$11,500 for a typical driveway gate with automation, and most jobs are finished in one to three days once materials are on hand. We’re the Ironworks Gate Co. team, and we’ve handled enough Van Nuys jobs to know exactly what this neighborhood throws at a gate: 110-degree summers, tight shared driveways, alley-fed lots that were never meant to be gated, and posts that move when the ground gets hot and cold in cycles. If you live in Van Nuys and you’re thinking about a new driveway gate, pedestrian gate, or security gate, call us at (925) 590-4289 and we’ll come measure and give you a written quote. That quote is free, and the number we agree on is the number you pay. Nothing changes mid-job.
Why Ironworks Gate Co. Is Van Nuys’s Preferred Gate Installation Company
We have been doing gate work since 1984, and Victor Salinas runs our crews the same way he did on day one: measure twice, weld once, and treat every house like it belongs to your mother. Van Nuys homeowners call us because they have heard the operator whine at 8 p.m. and they do not want to wake up to a gate stuck half-open on Sepulveda. We send background-checked, uniformed technicians in a marked truck, and a live person answers our phone 24 hours a day, seven days a week. Not a voicemail, not a call center. When you call at 10 a.m. wanting someone to look at your gate, we’ll give you a real arrival window, and we’ll be there when we say.
We service nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Van Nuys because so many homes here have older openers kept running past their usable life. We can match what’s on your driveway or recommend a better option for how Van Nuys actually gets hot. And the 90-Day Done Right Promise applies to every installation we complete in Van Nuys: if something is not right, we come back and make it right, in writing, no arguing and no extra charge.
Our Gate Installation Services in Van Nuys
Driveway Gate
A new driveway gate in Van Nuys usually means either a sliding gate or a swing gate, sized to a driveway that may be narrow, angled, or shared with a neighbor. We set posts to the right depth, run the operator and safety sensors, and make sure the gate clears the sidewalk and the street line. Many Van Nuys homes were built in the 1940s and 1950s with detached garages and side-yard setbacks of only a few feet, so we spend a lot of time on post placement and foundation work before we ever hang the leaf.
Pedestrian Gate
Pedestrian gates in Van Nuys often sit on the side yard or in front of a walkway where a driveway gate won’t fit. We build and install pedestrian gates that match the driveway gate in style and finish, with a lock, a closer, and optional keypad access. On lots near Van Nuys Boulevard and the apartment blocks around Victory, we see pedestrian gates do double duty as security gates, so we’re careful about latch throw, hinge bearing, and how the gate sits in the frame.
Sliding Gate
Sliding gates are the solution for Van Nuys’s tightest sites: shared driveways off Kester Avenue, alley-fed garages, and commercial entries along Van Nuys Boulevard and the industrial corridors near Van Nuys Airport. When there is no room for a swing arc because the driveway hugs a neighbor’s carport or a cinderblock wall sits six inches off the property line, a sliding gate does the job. We install cantilever and track-type sliding gates, pour a concrete pad where the existing surface will not support the gate, and set the rack and pinion so the gate runs straight through summer expansion and winter cold.
Swing Gate
Swing gates still make sense on plenty of Van Nuys lots, especially single-family homes with a wide driveway and no shared easement. What we watch for here is what the Valley’s temperature swings do to pivot hinges and post alignment. A swing gate set on a 30-inch footing and a properly compacted base will hold plumb. One set on a shallow 18-inch footing will start dragging within a season. We do not take the shortcut.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We are trained and equipped on LiftMaster, FAAC, Mighty Mule, Elite, and five other automation brands, so the operator we recommend for your Van Nuys home will be one our technicians actually know how to service for the next ten years. We keep common parts for these brands on our trucks so a first visit in Van Nuys doesn’t turn into two or three. That matters when it’s July and your gate motor has been sitting in 109-degree air on the south side of the house.
Common Gate Installation Problems We See in Van Nuys Homes
- Shallow post footings on retrofitted driveways. Van Nuys has thousands of 1940s-1960s tract homes with only a few feet of side yard. When a gate gets added to that narrow strip, the posts often get set too shallow. A swing gate starts dragging, the operator strains, and the gate fails within a year. We set footings to the depth the soil and the gate actually require, usually 30 inches or more, and we compact the base properly.
- Sliding gates installed over old asphalt without a concrete pad. On shared driveways and alley-fed lots in Van Nuys, we see sliding tracks laid straight onto aged asphalt. The track flexes, the rack and pinion skips teeth, and the gate jams half-open at the worst possible time. Our Van Nuys sliding gate installations include a proper concrete pad that will not move with the seasons.
- Residential-grade operators on commercial gates near Van Nuys Airport. The industrial corridors along Van Nuys Boulevard and the blocks flanking the airport run security and roll-up gates 12 to 16 hours a day. Property managers trying to save money install residential-grade openers, and those burn out in months. We install commercial-duty operators with the right cycle rating for the actual workload.
- UV-blasted powder coat and pitted wrought iron. Van Nuys sits in the floor of the San Fernando Valley, where summer highs regularly hit 108-113°F and the UV is intense enough to bleach powder-coat finishes within two or three years. We spec finishes that hold up to inland Valley sun, and we tell Van Nuys customers up front what a finish will look like after three summers here. The honest answer beats a surprise repaint bill.
Pricing for Gate Installation in Van Nuys, CA
What you’ll pay for gate installation in Van Nuys depends on the gate type, the existing surface, and the operator you choose, but here are real ranges from jobs we have done in this market:
- Pedestrian gate, no automation: $1,400-$3,200
- Single swing driveway gate, manual: $2,800-$5,500
- Single swing driveway gate, automated: $4,500-$8,000
- Double swing gate, automated: $7,000-$12,500
- Sliding gate, automated, with concrete pad: $5,500-$15,000
- Commercial sliding or roll-up gate replacement near Van Nuys Airport: $8,500-$22,000
Post footings, removing and hauling the old gate, keypads, intercoms, and loop detectors are quoted separately and included in the written estimate we give before any work starts. We offer a free second opinion on any written estimate you already have, a $50 discount on repair work over $250, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. The price we quote is the price you pay. Call (925) 590-4289 for your free Van Nuys estimate.
We Also Serve Cities Near Van Nuys
Our Gate Installation team works throughout the central San Fernando Valley. If you’re in Sherman Oaks, Panorama City, Studio City, or North Hollywood, we handle Gate Installation in Van Nuys and the surrounding blocks as part of our regular service area. Dispatch is coordinated from our Los Angeles office, and crews serve Van Nuys locally every week.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Van Nuys
If your shared driveway has less than about 10 feet of set-back or the neighbor’s carport sits close to the property line, yes, a sliding gate is usually the right answer. A swing gate needs room to arc, and on many Van Nuys shared driveways that arc blocks the neighbor’s access or clips a wall. We’ll measure the setback, check the easement, and tell you which option actually fits. Call (925) 590-4289 and we’ll come look.
Entrapment protection matters everywhere, but it’s a bigger deal in Van Nuys because our housing stock has more narrow alleys, shared driveways, and pedestrian paths running right past moving gates. When a gate swings or slides in a tight space, a child or a delivery person can be closer to the moving leaf than they would be on a wide Burbank driveway. We install photocells, safety edges, and force settings that stop the gate the moment anything obstructs it.
For most Van Nuys gate posts, we pour footings at 30 inches deep or more, below the frost line that causes shallow-set posts to heave when the Valley gets below-freezing winter nights. That’s deeper than what many installers use on coastal jobs, because coastal LA almost never sees freeze-thaw cycles. In Van Nuys, those cycles are real, and a 30-inch footing prevents the gate from going out of plumb. Call us for a site check and we’ll confirm the right depth for your soil.
Yes, and this is one of the most common Van Nuys installations we do. Many postwar tract homes here have alley-fed garages that were never designed for gates, so there’s often no pad, no real post base, and an easement to respect. We pour a concrete pad where needed, set posts at the proper depth, and build a gate that works with the alley’s existing clearance. Every Van Nuys alley gate we install gets quoted in writing before any work begins. Call (925) 590-4289 for a free estimate.
Van Nuys is one of the hottest urban neighborhoods in California, with summer highs regularly reaching 108-113°F, and the Valley floor traps heat in a way Sherman Oaks’s slightly higher, more ventilated pockets don’t always experience. An operator mounted on a south-facing gate in Van Nuys gets cooked every afternoon. We size operators for the heat load, close up the motor compartment correctly, and recommend units with thermal protection so your LiftMaster or FAAC doesn’t shut down in July. Then we stand behind it with the 90-Day Done Right Promise.
Why Van Nuys Gate Work Is Different
Van Nuys sits in the floor of the San Fernando Valley, and that makes it a harder environment for gates than almost anywhere else in the region. Summer days here run 108-113°F, which is 10 to 15 degrees hotter than coastal LA neighborhoods just 20 miles away. Gate motors overheat and seize. Steel frames expand, and posts that were set too shallow go out of plumb. Rubber seals crack within a single season. We’ve also seen winter nights drop below freezing here, and the freeze-thaw cycle loosens anchor bolts and cracks welds that a coastal installer would never have to plan for. When we build a gate for Van Nuys, we build it for the Valley’s heat, the Valley’s cold nights, and the Valley’s UV. A gate installed by someone who doesn’t know Van Nuys weather will not last. Ours do, and the 90-Day Done Right Promise says so in writing.
On a shared driveway off Kester Avenue in Van Nuys, we replaced a warped double swing gate with a single sliding gate and a LiftMaster operator because the 9-foot setback left no room for a swing arc without blocking the neighbor’s carport. We set new post footings at 30 inches deep, ran a rack and pinion, installed safety photocells across the narrow alley, and kept pedestrian access open with a temporary keypad entry on a temporary post. The new gate cleared the neighbor’s van by 4 inches and hasn’t tripped a loop detector in two summers of 110-degree heat. That’s the kind of job we do in Van Nuys all the time, and it’s why we measure twice before we ever order steel.
If you’re ready to get a gate installed in Van Nuys, or you want a second opinion on a quote you already have, call Ironworks Gate Co. at (925) 590-4289. A live person answers. We’ll schedule a free measure, give you a written price, and get the job done right. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Van Nuys since 1984.