Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Sherman Oaks Homeowners
A new Gate Installation - Sherman Oaks typically costs between $4,200 and $18,000 installed, depending on size, material, and whether you’re adding automation. Most standard single-swing gate installations take one to two days on site once the gate itself is fabricated or delivered. Since 1984, Ironworks Gate Co. has built and hung gates across the San Fernando Valley, and our crews know the specific challenges Sherman Oaks properties present: narrow side yards, sloped driveways off Ventura Boulevard, and older homes where nothing is quite square anymore. Victor Salinas leads a team that treats your gate like it’s going on his own mother’s driveway. Call (925) 590-4289 any time, day or night, and a live person will answer.
What Our Gate Installation Service Includes
We handle Best Gate Installation in Sherman Oaks, CA for every type of residential gate homeowners ask for. Each job starts the same way: we come out, take exact measurements, check the ground and the posts, and talk through what will actually work on your property before we quote a dollar figure. No pressure, no vague estimates, and definitely no surprises after the work starts.
Driveway Gate
A driveway gate is the largest and most visible gate on your property, and it’s the one that takes the most planning. In Sherman Oaks, where many homes sit on lots that slope toward the street, we account for drainage and grade changes so the gate doesn’t drag or bind in wet weather. Ironworks Gate Co. welds and fits the frame on site, then hangs the gate so it swings or slides true from the first day. We handle the full scope: posts, hinges, gate, opener wiring, and final alignment.
Pedestrian Gate
A pedestrian gate gives you a separate walk-through entrance, so you’re not opening the big driveway gate every time you check the mail or walk the dog. These gates often get more daily use than any other piece of metal on the property, which means the hinges and latch have to be right from day one. We build pedestrian gates to match the style of your driveway gate and set them with hardware that won’t sag after a year of daily cycles.
Sliding Gate
Sliding gates are the smart choice when a driveway is too short or too steep for a swing gate to operate safely. Instead of arcing outward, the gate rides on a track and moves sideways along your property line. We install sliding gates with proper track beds, roller placement, and motor sizing so the gate moves smoothly even when it’s fully loaded with steel. Sherman Oaks hillside lots are exactly where this style earns its keep.
Swing Gate
A swing gate pivots on hinges, either in a single leaf or two, and it remains the most popular residential style in the Valley. The advantage is simplicity and the look of it: a handsome steel or iron gate that opens like a door. The challenge is post anchoring, because a heavy gate on undersized posts will droop and start scraping within months. Our installs use galvanized steel posts set deep in concrete, sized to the weight of the gate, not just the width of the opening.
Double Gate
Double gates, also called bi-parting swing gates, are two leaves that meet in the middle of the driveway. They divide the weight across two posts and two sets of hinges, which makes them easier on the hardware when the gate is wide. We align both leaves so they close flush at the center without a gap, then sync the openers so both sides move together without binding.
Security Gate
A security gate is built to hold up against force as much as it is to look good. We use heavier-gauge steel, reinforced lock points, and tamper-resistant hinges on these installs. In Sherman Oaks, where some homeowners are upgrading after break-in attempts on the street, we’re honest about what a gate can and cannot do. A well-built security gate slows entry and signals that your home is not an easy target, and we build them to that standard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
When we install a gate with automation, the opener brand matters, and we’re equipped to work on all of them properly. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we know the correct board, arm, harness, and programming sequence for whatever is going on your gate, not just whatever we happen to have in the truck.
On BFT and Linear openers, we see a lot of Sherman Oaks installs where the motor was undersized for the weight of the gate, and we correct that on the front end. With Viking and Ghost Controls, the issue is almost always improper limit-setting, so we take the time to dial in the open and close positions before we call the job done. Whether you have one of those brands or something else entirely, we can install it, wire it, and stand behind it in writing.
Signs You Need Gate Installation Right Now
- The gate drags or scrapes every time you open it. That’s a sign the posts are moving or the hinges are worn past repair. A gate that drags now will fail soon, and it’s harder on the opener every single cycle.
- The opener runs but the gate barely moves. That usually means the drive train or the control board is on its way out. Rather than patching a tired system, a new install with a correctly paired motor often costs less over two years than repeated service calls.
- You’re propping the gate open with a rock or a strap. When the gate can’t be trusted to stay closed, your home’s perimeter is open. A proper install with new hardware and automation restores the boundary without you holding your breath every time you leave.
- Rust has eaten through the bottom rail or the hinge plates. Steel eventually gives way, especially on older Sherman Oaks gates that have faced decades of sprinkler overspray. Once the structural steel is compromised, welding patches just buys you months, not years.
- The gate was hit by a car or a delivery truck. Bent frames and sheared posts don’t heal. We see this regularly on busy Sherman Oaks streets, and the fix is usually a new gate and new posts, not a bend-it-back patch job.
Our Gate Installation Process - Step by Step
We do the same thing on every gate install, in the same order, so you know what’s happening before it happens. There are no surprise visits, no mystery charges, and no disappearing for three weeks.
- 1
Measure and site assessment. We come out in person, take exact measurements of the opening, check the existing posts or where new ones will go, and look at slope, drainage, and access for equipment. This is where we catch problems that would otherwise show up six months later as a sagging gate.
- 2
Written quote and material selection. You get a line-item price on paper before any work starts. We talk through steel gauge, style, finish options, and the right opener for the weight and duty cycle. The price we agree on is the price you pay.
- 3
Post setting and fabrication prep. For most installs we set new steel posts in concrete and let them cure properly before hanging weight on them. If we’re custom-building your gate, our weld shop Fabricates it to the exact measurements from step one.
- 4
Gate hanging, hardware, and automation. We hang the gate, set the hinges or the track, mount the opener, run the wiring, and set the limit switches by hand. Every opener is tested through at least ten full cycles before we leave.
- 5
Walkthrough and the 90-Day Done Right Promise. We show you how it works, answer questions, and explain your written guarantee. If anything is not right within 90 days, we come back and fix it. No paperwork, no arguing. That’s the Keystone Standard.
How Much Does Gate Installation Cost in Sherman Oaks?
A basic single swing gate with steel construction and manual operation in Sherman Oaks generally runs $4,200 to $8,500 installed. Adding automation and a quality opener brings most jobs into the $8,000 to $14,000 range. A full estate double gate with custom fabrication, heavier steel, and automation on a wider driveway typically lands between $12,000 and $18,000, and can go higher if you’re adding stone columns, custom finishes, or access control. These are not one-size-fits-all numbers. The price changes based on gate width, the weight of the steel, whether posts need to be replaced, the terrain of your driveway, and the opener brand and duty cycle you choose.
What affects the cost most is the quality of what’s under the gate: the posts, the hinges, the track, and the opener. A cheap gate on good posts will outlast an expensive gate on bad posts, so we never cut the foundation to save money. The way to avoid overpaying is simple: get a written line-item quote, compare what’s actually included, and know that our estimate covers the entire job, not just the gate itself. Estimates are free, and the price is settled before a single bolt is turned.
Gate Installation Near Sherman Oaks - Our Service Area
Ironworks Gate Co. installs gates across Sherman Oaks, Gate Installation in Van Nuys, Gate Installation in Encino, Studio City, Bel Air, North Hollywood, Panorama City, Beverly Hills, Brentwood, Northridge, Burbank, and Reseda. We schedule our Sherman Oaks jobs tightly, and because our crews are based locally, we can usually be on site for a measure within a few days of your call. Since 1984, we’ve been the gate company Valley homeowners call when they want it done right.
Serving Sherman Oaks, CA - Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Sherman Oaks
Gate installation is the full process of planning, fabricating or sourcing, and setting a driveway or pedestrian gate on your property, including the posts, hinges, hardware, and optional automation. It covers everything from the first measurement to the final walkthrough, and it’s distinct from repair work in that we’re building a new system rather than fixing an existing one. At Ironworks Gate Co., a proper install means posts set deep in concrete, hardware matched to the gate’s weight, and an opener that’s sized correctly from day one.
Most standard single-gate installations in Sherman Oaks are completed in one to two days on site. Custom fabrication adds lead time, usually a week to ten days, but the on-site work itself is still measured in days, not weeks. We’ll give you a schedule in writing before we start, and we’ll be there when we say.
Expect $4,200 to $18,000 depending on the gate type, size, material, and whether automation is included. The wide range reflects the difference between a modest manual pedestrian gate and a large automated double driveway gate with custom steelwork. Call (925) 590-4289 and we’ll give you an exact written quote for your specific property, free of charge.
Yes, and this is where our expertise really matters. We install and program openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever we put on your gate is matched to its weight and daily cycle count. A correctly paired opener lasts years longer than an underpowered one, and we set every limit and safety circuit by hand before we finish.
We offer Emergency Gate Installation in Sherman Oaks, CA with a flexible schedule for urgent cases, especially when a gate has failed and left a driveway open. When you call, a live person answers, and we’ll tell you honestly how soon we can get a crew out. If your property is exposed, we’ll prioritize it.
Every gate installation comes with our written 90-Day Done Right Promise. If anything is not right within 90 days of the install, we come back and make it right, no forms and no arguments. That’s the Keystone Standard, and it has been applied to every job we’ve done since we started.
Clear the driveway area and make sure our crew has room to work around the gate opening. If you have sprinkler lines near the posts, mark them if you can. We’ll handle everything else, from permits and measurements to the final cleanup, and we’ll walk you through what to expect before we begin.
Schedule Your Gate Installation Service in Sherman Oaks Today
Call (925) 590-4289 and speak with a live person about your gate project. We’ll schedule a free on-site measure, give you a written price before any work starts, and stand behind the finished job in writing. The price you’re quoted is the price you pay, and the gate you get is the last one you’ll need.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Sherman Oaks since 1984.