Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pacific Palisades
Gate parts and welding in Pacific Palisades means dealing with two forces most of Los Angeles never faces: salt-heavy ocean air and the ongoing rebuild from the 2025 Palisades Fire. A gate in the 90272 ZIP code corrodes faster, sags sooner, and fails differently than one in Encino or Sherman Oaks. That’s exactly why our Gate Parts & Welding team keeps marine-grade post stock, sealed operator enclosures, and jig-welding equipment ready for Pacific Palisades jobs every week. If your gate is sagging, rusted through at the base, or heat-warped from the fire, call (925) 590-4289 and we’ll give you a straight answer and a written quote before any work begins.
Why Ironworks Gate Co. Is Pacific Palisades’s Preferred Gate Parts & Welding Company
We’ve rebuilt enough gates in the Castellammare section to know that the marine layer here doesn’t just rust steel. It creeps into operator enclosures, sits on circuit boards, and corrodes hinge post footings from the inside out. Homeowners in Pacific Palisades call us because we already know what we’ll find before we arrive. Victor Salinas founded this company in 1984, and the crews serving Pacific Palisades today are background-checked, uniformed welders and gate technicians who work the way you’d want someone working at your own mother’s house. Every job, from a single hinge replacement to a full post replacement and custom rail weld, is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and fix it. No paperwork, no argument.
The response to Pacific Palisades is quick, and our phone is answered by a live person 24 hours a day, 7 days a week. When a swing gate is dragging on a bluff-edge driveway in Castellammare or a fire-damaged rail has pulled a weld apart near Via de la Paz, waiting until Monday isn’t an option. We’ll be there when we say.
Our Gate Parts & Welding Services in Pacific Palisades
Key Takeaways:
- Hinge replacement and gate roller work on most Pacific Palisades gates runs $180-$420, depending on gate weight and access.
- Post replacement is heavier work: budget $700-$2,200 for a rotted or fire-compromised post, including concrete footing and finish welding.
- Custom welding of ornamental iron and steel sections typically runs $150-$900 per section, depending on profile complexity and original fabrication style.
- All quotes are settled before we start, and every job carries the 90-Day Done Right Promise.
Hinge Replacement
Hinges on Pacific Palisades gates don’t fail the way they do inland. The salt air works its way into the hinge barrel, and by the time you hear that first creak, the bearing surface is usually already pitted. We stock heavy-duty ball-bearing hinges sized for the heavier 14- and 16-foot iron gates common on Sunset Mesa and the Via Bluffs, and we match the original hinge geometry so the gate still hangs and swings true after replacement.
Post Replacement
This is the most common structural repair we perform in Pacific Palisades, especially on properties that sit close to the coast. The post looks solid at eye level, but the footing and the bottom six inches of steel are rusted thin. We saw it on a Castellammare bluff property recently: the gate panel looked straight, but it sagged into the driveway because the hinge post had rotted through below grade. We cut out the old post, set a new marine-grade post in concrete, and re-hung the gate so it cleared the slope cleanly. Post replacement on canyon lots or steep driveways takes longer due to access and concrete disposal, and we quote that time honestly up front.
Rail Repair
Top and bottom rails are the backbone of any swing or slide gate, and on Pacific Palisades homes built in the 1950s through 1970s, those rails are often original wrought iron that’s been fighting the marine layer for half a century. When a rail rusts through or, more commonly now, heat-warped from the Palisades Fire, we cut out the damaged section and weld in a matched replacement rail, then re-align the panel so it hangs square and closes without scraping. We don’t patch over corrosion. We cut it out and weld in clean steel.
Custom Welding
Pacific Palisades has more custom ornamental gates per mile than almost anywhere else in Los Angeles. Spanish Colonial homes off Bienveneda, mid-century ranches in the Huntington, bluff estates in Castellammare. These gates weren’t bought from a catalog, and they can’t be repaired with off-the-shelf parts. Our welders fabricate replacement pickets, scrollwork, finials, and rail sections to match the original profile. We’ve matched the ironwork on a 1960s post-and-beam ranch in the Highlands and a Spanish Colonial on Amalfi Drive, and the repairs disappear when the job’s done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pacific Palisades
Most Pacific Palisades gates run on automation, and we’re trained and equipped on nine major opener brands. In this area, we mostly work on LiftMaster, FAAC, and BFT systems, though Linear and Viking units show up regularly on older estate gates. When an operator fails because the marine layer has gotten inside the enclosure, we replace the board, seal the box properly, and set the travel limits so the gate doesn’t strain the hinges. For fire-damaged properties in rebuild, we’re currently installing complete new opener systems with sealed enclosures sized for coastal conditions, not inland spec.
Common Gate Parts & Welding Problems We See in Pacific Palisades Homes
- Sagging gates with straight-looking panels: The hinge post footing has rusted through near the base, common on oceanfront and bluff-edge properties where salt-saturated soil attacks the steel below grade. The panel itself is fine; the post is the problem.
- Heat-warped rails from the Palisades Fire: A gate that survived the fire often has top or bottom rails bowed from heat. Standard hinge replacement can’t correct that; the rail has to be cut and re-welded with jigs to pull the panel back into square.
- Operator circuit boards shorting from moisture intrusion: Inland-spec enclosures let Pacific Palisades fog sit right on the logic board. When the loop detector or photocell circuit dies mid-cycle, it’s usually moisture, not a wiring fault.
- Gate rollers binding on slide gates: The salt air pitts roller bearings, and canyon dust from the rebuild activity accelerates wear. We carry replacement rollers in several wheel diameters and axle sizes so we can swap them on the first trip.
Pricing for Gate Parts & Welding in Pacific Palisades, CA
Here’s what honest Pacific Palisades gate work costs right now. A standard hinge replacement on a 12-14 foot gate runs $180-$320. Heavier 16-foot estate gates with three or four hinges run $280-$420. Post replacement starts around $700 for a straightforward driveway post and runs up to $2,200 when we’re working on a steep bluff lot with difficult concrete access. Custom welding of replacement pickets, scrolls, or rail sections runs $150-$900 per section depending on profile complexity and original fabrication style. Fire-damage weld repair starts at $350 for a simple rail cut-and-weld and goes up from there for full gate re-alignment. Before we touch a single bolt, you get a written quote and we agree on the number. Call (925) 590-4289 for a free estimate: we’ll walk the gate with you and tell you exactly what it needs.
We Also Serve Cities Near Pacific Palisades
Our crews cover the surrounding Westside and Valley communities, including Santa Monica, Beverly Hills, Sherman Oaks, and Encino. If you’re in one of those areas and need gate parts or welding work, call the same number: (925) 590-4289. We’ll coordinate the visit from our Los Angeles office and have a technician at your driveway on schedule.
Serving Pacific Palisades, CA - Our Local Coverage Area
We’re based in the Pacific Palisades area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pacific Palisades
The hinge post footing has almost certainly rusted through at or below grade, even though the visible portion of the post still looks clean. Salt-laden soil along the coast, especially in the Castellammare section and on bluff-edge lots, accelerates steel corrosion at the concrete-to-air transition point. We replace the post and set a new marine-grade footing, then re-hang the gate so it clears the driveway correctly. Call (925) 590-4289 and we’ll inspect the post before you spend money on hinges that won’t fix the problem.
Many fire-damaged gates can be repaired with custom welding, provided the steel hasn’t lost its structural temper beyond the warped section. We cut out the bowed rail or picket, weld in matched replacements, and re-align the panel on jigs so it hangs and cycles correctly. If the gate frame is twisted across its full width, replacement is the safer and cheaper long-term option, and we’ll tell you that plainly. Either way, the price is settled before we start.
A marine-rated or weatherproofed-enclosure operator, not a standard inland-spec unit. The salt-heavy fog in Castellammare corrodes logic boards on unprotected operators within 18-24 months, killing the loop detector and safety photocell circuits before the motor itself fails. We install LiftMaster, FAAC, and BFT units in sealed enclosures with conformal-coated boards, which is the only configuration we’ve seen hold up on this stretch of coast. Call (925) 590-4289 and we’ll spec the right unit for your driveway’s exposure.
Look at the gate when it’s open. If it sags toward the ground even after the hinges are tightened, or if the gap between the gate and the driveway changes when you lift the panel by hand, the post footing is compromised. We confirm with a level and a pry check on the post base. A rotted post will flex slightly at ground level; a sound one won’t. If it flexes, new hinges are money wasted. Call (925) 590-4289 and we’ll check it on site.
Yes. We match the original scrollwork, picket profile, and rail dimensions on gates throughout the Palisades, from Spanish Colonial homes off Bienveneda to mid-century ranches in the Huntington and bluff estates in Castellammare. Our welders hand-form scrolls and profile-match replacement sections so the repair is invisible against the original iron. Call (925) 590-4289 and send us a photo, or we’ll come out and take measurements.
If your Pacific Palisades gate is sagging, rusted, heat-warped, or simply not closing the way it used to, call (925) 590-4289. A live person answers, we’ll talk through what you’re seeing, and we’ll set a time to come look. Free estimate, written quote before any work, and the 90-Day Done Right Promise on every job.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pacific Palisades since 1984.