Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pacific Palisades
A new driveway gate in Pacific Palisades typically costs between $4,500 and $14,000 installed, depending on the gate style, operator, and whether you’re rebuilding after the January 2025 fire. Most standard installations take one to three days once materials are on site, and we quote every job in writing before any work begins. If you live in the 90272 ZIP code, call us at (925) 590-4289 and a live person will answer, day or night.
We know this stretch of coast. We know what the marine layer does to steel. And we know that a gate on a Castellammare bluff lot has different demands than one tucked back off Sunset Boulevard. That local knowledge is why homeowners from the Huntington Palisades to Marquez Knolls call us when they want the job done once. Our Gate Installation team handles everything: driveway gates, pedestrian gates, slide and swing systems, security gates, and full automation retrofits.
Why Ironworks Gate Co. Is Pacific Palisades’s Preferred Gate Installation Company
Ironworks Gate Co. has built gates for over 42 years, founded in 1984, and we plan to be working in Pacific Palisades for another forty. Homeowners here tend to stay. They remember the contractor who cut corners. So when we quote a gate in Pacific Palisades, we spell out exactly what steel, what hardware, what finish, and what operator goes into it, and every job is covered by our written 90-Day Done Right Promise.
Our reputation in Pacific Palisades rests on small things done consistently. Background-checked, uniformed technicians show up when we say they will. A live person answers the phone 24 hours a day, 7 days a week. No voicemail trees, no answering service, no waiting until Monday to hear back about a gate that will not open. Victor Salinas leads the company, and he still checks in on jobs personally.
We work from our Los Angeles office and dispatch crews into Pacific Palisades daily. For most installations, we can be on site within two to four business days for the initial measure and quote.
Our Gate Installation Services in Pacific Palisades
Driveway Gate Installation
Driveway gates in Pacific Palisades span the full range: simple single swing gates on mid-century ranch homes off Bienvenida Avenue, massive estate gates on double lots in the Riviera neighborhood, and modern horizontal slide gates on tighter canyon parcels. We size the gate, the posts, the hinges, and the operator to the specific driveway. No guesswork. Every installation starts with a free on-site measure so the quote reflects your actual property.
Pedestrian Gate Installation
A pedestrian gate gets more daily cycles than the driveway gate and takes more abuse from salt air simply because people touch it constantly. We build pedestrian gates with 316 stainless hinges, marine-grade finishes, and self-closing hardware that will hold up to the coastal conditions in the Castellammare area. Whether it’s a matching courtyard gate or a standalone entry on a beach access path, we install it to the same standard as the main gate.
Sliding Gate Installation
Sliding gates suit Pacific Palisades lots with short setbacks or uphill driveways where a swing arc would eat into usable space. We install cantilever slide gates, trackless slide systems, and chain-driven or belt-driven operators. On hillside properties above Sunset, we often recommend steel frame with vertical pickets rather than solid panels, which catch wind off the ocean and stress the roller assembly.
Swing Gate Installation
Swing gates remain the most common choice in Pacific Palisades, especially on wider lots. Single and double swing configurations both work well, but the operator choice matters more here than inland. Salt-laden air shortens the life of standard actuator arms. We spec marine-rated or weatherproofed operators and mount them in enclosures that actually keep the coastal environment out.
Security Gate Installation
A security gate in the 90272 ZIP code is not just about keeping cars out. It’s about controlling who can approach a home that sits well back from the road, often on canyon or bluff lots with limited visibility. We install gates with perimeter fencing integration, keypad access, intercom tie-in, and vehicle detection loops that hold up to the marine layer. If you’re rebuilding after the fire, this is the time to build security into the property line, not bolt it on afterward.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pacific Palisades
We are trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Pacific Palisades specifically, we keep common BFT and Viking parts stocked locally because those are the two operators we see most often on estates here. If you have an existing Linear or Ghost Controls system, our technicians carry the diagnostic tools and replacement boards to make the correct fix on the first visit. Whatever is on your driveway, we can work on it.
Common Gate Installation Problems We See in Pacific Palisades Homes
- Salt-corroded operator boards. On homes in the Castellammare and bluff-edge areas, the dense Pacific Palisades marine layer causes chloride bridging across low-voltage traces on circuit boards. The board fails, the gate throws phantom limit errors, and the homeowner is told they need a full replacement when often a weatherproof enclosure and a coated board would solve it.
- Powder coat micro-cracking at welds. Near the coast, powder-coated steel frames flex with temperature swings, and the coat cracks at welded joints within 18 months. Salt air reaches the raw steel underneath, and rust blooms through the finish. We see this constantly on gates installed by inland contractors who never considered the marine environment.
- Zinc-plated hardware seizing up. Standard zinc-plated hinge pins and post anchors corrode fast in Pacific Palisades. Galvanic corrosion between the zinc and the steel seizes the hinge, putting the entire gate load on the post until the weld tears free. We spec 316 stainless on coastal installs for exactly this reason.
- Inland-spec operators installed on oceanfront lots. This is perhaps the most common failure we walk into. A contractor installs an operator rated for dry inland use on a bluff-side property above the beach, and the homeowner replaces the board every 18 months wondering why. The answer is simple: that operator should never have been installed within two miles of salt water.
Pricing for Gate Installation in Pacific Palisades, CA
A standard single swing driveway gate in Pacific Palisades with a basic operator runs roughly $4,500 to $8,500. A larger double swing gate, or a slide gate with automation, typically lands between $7,000 and $14,000. Custom estate gates with welded steel, access control integration, and marine-rated hardware range from $15,000 to $30,000 or more depending on design. Pedestrian gates built to match typically fall between $2,000 and $5,000. These figures include labor, materials, operator, and our written 90-Day Done Right Promise.
Two things drive cost here more than anywhere else in Los Angeles: the required marine-rated hardware and the condition of the posts and footings. Salt air eats standard posts faster than people expect, and on fire-rebuild parcels, old footings often need to be re-poured before a new gate can go in. We quote everything before work starts, so the number you approve is the number you pay. Call (925) 590-4289 for a free estimate.
What the Coast Actually Does to a Gate
Here is the central fact about gate installation in Pacific Palisades that most contractors miss: the marine layer here is saltier and denser than in Santa Monica or Brentwood, and it sits on the metal longer. The Palisades has deep canyon topography that traps fog against the hillsides. On a typical summer morning, a steel gate in the Huntington Palisades or off Via de la Paz can be wet with condensed salt fog for four or five hours before the sun burns it off. That means corrosion cycles accelerate on a daily basis.
Our experience mirrors this. On a Castellammare bluff lot, we pulled a LiftMaster LA400 slide gate operator that had eaten two logic boards in three years. The boards were visibly furred with salt crystals from the coastal marine layer. We reset the post footing, installed the replacement operator inside a weatherproof NEMA 4X enclosure with a desiccant pack, and swapped every exposed fastener for 316 stainless. The system has now run through two full winters without a single board fault. That is what spec’ing for the coast means.
The gate operator logic boards on oceanfront and bluff-edge properties here fail at roughly double the rate of inland Los Angeles. That is not a manufacturer defect. It is an environment problem. On every new Pacific Palisades install, we either mount the operator in a marine-rated enclosure or apply conformal coating to the board before it ever goes into service. This one decision adds years to the life of the system and saves homeowners from replacing boards they should never have had to replace in the first place.
Fire Rebuilds: What to Do With the Old Gate
The January 2025 Palisades Fire changed the conversation about gate installation in the 90272 ZIP code. Thousands of properties were damaged or destroyed, and we are now working on parcels where the old gate is heat-warped, the wiring is melted, and the operator is a fused box of plastic and copper. The question we hear most often: can the old steel be reused?
Sometimes. Heat-warped steel loses its temper, and gates that baked in the fire often have micro-fractures at the welds that you cannot see until the metal cools and contracts. If the gate frame is still true and the hinges were not directly exposed to flame, we can sometimes salvage it. But the operator and all low-voltage wiring should always be replaced, and the posts need to be checked for heat damage even if they look intact. We give every fire-rebuild gate an honest assessment. If the steel is sound, we will say so and save you money. If it is not, we will tell you that too.
We Also Serve Cities Near Pacific Palisades
While this page covers Pacific Palisades specifically, our crews also serve Santa Monica, Beverly Hills, Sherman Oaks, and Encino. The same marine-grade specs and the same 90-Day Done Right Promise apply on every job. If you are outside the 90272 ZIP code but in the surrounding area, call us and we will send a technician out.
Serving Pacific Palisades, CA - Our Local Coverage Area
We’re based in the Pacific Palisades area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pacific Palisades
Gate operators in the Castellammare section of Pacific Palisades fail faster because the marine layer there is saltier and denser than anywhere else on the LA coast, and it pushes chloride-laden moisture into the operator cabinet day after day. The chloride deposits bridge across low-voltage traces on the logic board, causing phantom limit errors and no-open conditions. Most failures are not mechanical; they are electrical, caused by corrosion on the board. On every new install in this area, we mount the operator in a weatherproof NEMA 4X enclosure and apply conformal coating to the board. That is what actually lasts. Call (925) 590-4289 for an operator assessment.
In many cases, yes, the steel from a fire-damaged gate in Pacific Palisades can be reused if the frame is still true and the welds are intact, but the operator, wiring, and posts must always be assessed for heat damage separately. Fire heat can weaken steel at the molecular level even when the surface looks fine, and micro-fractures at welds often appear only after the metal cools. We inspect every fire-rebuild gate directly. If the steel is sound, we will reuse it and save you several thousand dollars. If not, we will show you why. Call (925) 590-4289 for a fire-damage gate assessment.
For oceanfront and bluff-edge homes in Pacific Palisades, we spec galvanized steel frames with a marine-grade powder coat and 316 stainless hardware throughout, including hinge pins, post anchors, and fasteners. Standard zinc-plated hardware seizes within two to three years in the coastal air here. If the budget allows, aluminum frames with stainless hardware are the longest-lasting option, but galvanized steel with proper coating is the practical choice for most driveway gates. We do not install painted mild steel within two miles of the Pacific Palisades coast because it will rust through the finish within 18 months.
For most Pacific Palisades properties, a hardwired operator is the better choice, especially on fire-rebuild parcels where new electrical conduit is already being run to the property line. Solar works where the gate is far from a panel and sun exposure is reliable, but the marine layer here cuts into solar efficiency for part of the day, and solar-charged batteries lose capacity faster in salty air. If your rebuild already includes new underground electrical runs, hardwired is simpler and more reliable long-term. Call (925) 590-4289 and we will walk you through both options for your specific lot.
The one thing most gate installers miss on a new security gate in Pacific Palisades is the weatherproofing of the operator enclosure. Almost every failed operator we replace on oceanfront and bluff-side properties was installed in a standard enclosure with no additional sealing, no desiccant, and no conformal coating on the board. The result is a board that fails every 18 to 24 months. On our installs, the enclosure gets sealed, the board gets coated, and the fasteners get swapped to stainless. That is the difference between a gate that fails and a gate that runs for a decade. Call (925) 590-4289 to spec your security gate correctly from day one.
Get Your Free Estimate
If you live in Pacific Palisades and you are thinking about a new gate, call (925) 590-4289 today. A live person will answer, take your details, and schedule a free on-site measure. You will get a written quote with the full spec, the price, and the timeline before any work is approved. We do not do surprises on the bill, and we do not leave a job until it is done right. That has been our standard for over 42 years, and it is the standard we bring to every driveway in Pacific Palisades.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Pacific Palisades since 1984.