Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Beverly Hills
Gate parts and welding in Beverly Hills comes down to one thing: most of the gates here were never built from a catalog. A hinge fails on a 1940s wrought iron estate gate north of Sunset, and the fix isn’t a trip to the hardware aisle. It’s cutting out the old steel, welding in a matched replacement, and making sure the whole assembly passes City of Beverly Hills inspection. Our crews know that drill. We fabricate, weld, and replace parts on custom and legacy gates across 90209, 90210, and 90211, and we quote every job before work begins. Call (925) 590-4289 for a free estimate.
Why Ironworks Gate Co. Is Beverly Hills’s Preferred Gate Parts & Welding Company
We’ve been doing this work since 1984, and what we see in Beverly Hills doesn’t surprise us anymore. The city’s older estate gates, especially the 1930s through 1960s ornamental iron ones in the flats, come with mixed-generation hardware that most gate shops don’t recognize. A LiftMaster operator from the 1990s bolted to a 1950s FAAC arm, a set of hinges welded sometime in the 1980s, a latch that’s been shimmed twice. It’s all undocumented, and it all still needs to work.
Our field crews serve Beverly Hills daily. A live person answers the phone 24 hours a day, 7 days a week, not a voicemail tree and not an answering service. When a gate won’t close on Roxbury Drive or a post is leaning on a hillside property above Benedict Canyon, you talk to someone who can actually dispatch a truck. Our technicians are background-checked, uniformed, and trained across nine opener brands, so the fix happens on the first visit more often than not. Victor Salinas leads our team, and he holds every job to the same standard: done right, and backed in writing.
Our Gate Parts & Welding Services in Beverly Hills
Most of what we do in Beverly Hills falls into four categories. Here’s how each one plays out in this city, where the houses are older, the gates are custom, and the inspections are handled by City of Beverly Hills, not Los Angeles.
Hinge Replacement
Hinges on Beverly Hills gates take a particular beating. On flat lots in the 90211 flats, decades of daily swing cycles wear the pin and barrel until the gate sags a half inch at the latch. On hillside estates north of Sunset, Santa Ana wind loads torque the hinge brackets against posts that may have shifted. We cut out the old hinge, weld in a replacement sized to the gate’s weight and swing radius, and re-align the panel so the latch catches clean. No shimming, no temporary fixes.
Post Replacement
Post replacement in Beverly Hills is a bigger job than it looks, because most original posts from the 1930s through the 1960s were set in shallow footings. Hillside soil movement north of Sunset works those shallow footings loose over time, and a leaning post eventually throws the whole gate out of alignment. We remove the old post, pour a new deeper footing, and weld or anchor a reinforced post back into place. If the gate is automated, the post replacement also has to pass City of Beverly Hills inspection for UL 325 entrapment protection, a step we handle as part of the job.
Rail Repair
Rails on sliding and cantilever gates in Beverly Hills face a different problem: dry heat and UV exposure degrade powder-coat finishes faster than properties closer to the coast. Once the coating fails, the underlying steel rail starts to rust, and a surface patch job won’t stop it. We cut the damaged section, weld in new steel, and finish it to match the surrounding gate. On hillside properties where wind stress is a factor, we also check the rail-to-post connection for fatigue cracks.
Custom Welding
This is where Beverly Hills work differs most from other cities. The overwhelming share of residential gates here are one-of-a-kind fabrications: wrought iron scrollwork, architectural steel, cast elements you can’t order from any supplier. When a scroll cracks or a spear point snaps off a 1930s gate, you can’t buy the replacement part. Our welders fabricate it from stock steel, match the contour and finish, and weld it in so the repair disappears into the original design. We work with Crestron and Control4 integrators when the gate ties into a smart-home access system, so the welded part doesn’t fight the electronics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
Our Gate Parts & Welding team carries parts and service training for LiftMaster, FAAC, BFT, and Linear, among others. The point is that when a legacy FAAC control board dies on a 1960s estate gate in the Beverly Hills flats, we don’t have to jerry-rig a substitute. We install the correct board, wire it to the existing motor, and adjust travel and force settings so the gate moves like it did when the operator was new. Faster turnaround, no second visit, and the work is covered by our 90-Day Done Right Promise.
Common Gate Parts & Welding Problems We See in Beverly Hills Homes
- Drifted latch alignment on hillside gates. Soil movement north of Sunset shifts swing gates out of alignment every season. Flat-land technicians often blame the keypad or motor, but the real culprit is usually the post footing. We fix the post, not the symptom.
- Obsolete control boards on legacy operators. 30- and 40-year-old LiftMaster and FAAC boards fail without warning. Many are no longer manufactured. We stock compatible replacements and know which ones work with which motor type.
- Worn hinge posts on wind-exposed driveways. Santa Ana winds stress hinge posts on hillside estates, causing sag correction failures when only the panel is repaired. We inspect the footing before we weld anything.
- Cracked ornamental iron on 1930s-1960s gates. Original wrought iron and architectural steel gates crack at high-stress points: hinge mounts, latch plates, and scroll junctions. We TIG or MIG weld depending on the metal, and we match the finish so the repair doesn’t look like a repair.
Pricing for Gate Parts & Welding in Beverly Hills, CA
In Beverly Hills, hinge replacement on a standard swing gate typically runs $350 to $750 per hinge, including the weld and alignment work. Post replacement runs higher, usually $900 to $2,400 depending on footing depth, post size, and whether the gate is automated and needs re-inspection. Custom welding for ornamental iron repairs runs $180 to $600 per section, and latch and lock replacement on an estate gate typically lands between $250 and $800. Rail repair on a sliding gate runs $400 to $1,200, depending on how much steel has to come out. Every quote is written, agreed, and signed before work starts. That’s a square deal: upfront price, no surprises on the bill. If a competitor has given you a written estimate, bring it in and we’ll give you a free second opinion. Call (925) 590-4289 for an exact quote. We offer $50 off any repair over $250 and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Beverly Hills
Our crews run routes through West Hollywood, Studio City, North Hollywood, and Sherman Oaks every week. The work is the same, but the permitting isn’t, which is why you want a crew that knows the difference between City of Beverly Hills and City of Los Angeles. We serve all of Beverly Hills, from the flats to the hills, 24/7.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Beverly Hills
Beverly Hills is an independent municipality with its own building department, so any gate operator retrofit or post replacement on an automatic gate must pass City of Beverly Hills inspection for UL 325 entrapment protection, not Los Angeles. That means a photocell test, force-sensitivity check, and post-footing depth verification. We handle the inspection scheduling and stand behind the compliance. Call (925) 590-4289 and we’ll walk you through what your specific gate needs.
On gates north of Sunset, it’s almost always the post. Hillside soil shifts seasonally, the footing heaves, and the gate drifts out of latch alignment. A panel adjustment buys you a few weeks. A proper footing repair and post re-alignment fixes it for good. We inspect the footing first, free of charge with any repair call.
Yes, in most cases. We retrofit legacy FAAC and LiftMaster operators with current UL 325-compliant photocells, force settings, and control boards. The motor itself often has decades of life left. The retrofit is the inexpensive part; the big question is whether the existing post footing can hold alignment through a City of Beverly Hills inspection. We’ll tell you the truth about your specific gate before quoting.
Yes, we coordinate directly with AV and smart-home integrators for Crestron and Control4 systems. Replacing a latch or lock on an estate gate usually means rewiring the strike, re-registering the dry contact, and testing against the access control sequence. We handle the electro-mechanical side so the integrator’s code works with the weld, not against it. Estimates are free, so call (925) 590-4289 and we’ll look at your system.
Yes. We’ll cut out the cracked section, fabricate a replacement hinge from matching stock, and TIG-weld it in so the ornament is continuous. The patina and finish get matched to the surrounding iron. On the hillside estate north of Sunset where we rebuilt a 1940s swing gate, the homeowner’s only complaint was that the repaired hinge looked newer than the other one, which tells you the fit and finish were close enough. Call (925) 590-4289 and we’ll quote the repair and the finish matching.
Get a Free Estimate for Gate Parts & Welding in Beverly Hills
If you own a gate in Beverly Hills, chances are it’s old, custom, or both. That’s not a problem. It’s what we do. The welding, the parts, the old operators, the city inspection: we handle all of it, and we quote the full price before any work starts. Standing offers include a free second opinion on any written estimate, $50 off repairs over $250, and an $89 seasonal tune-up. Call (925) 590-4289 and talk to a live person, day or night. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Beverly Hills since 1984.