Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Hollywood
If a broken hinge, snapped weld, or stripped gate rack is keeping your driveway gate from working, here’s the answer in plain terms: Ironworks Gate Co. handles Gate Installation in North Hollywood and replaces and welds gate parts across the area, usually in a single visit, with the price quoted and agreed before we turn a single bolt. We work on apartment courtyard gates in 91601, mid-century shared-driveway gates in 91602, and the older slide gates common throughout 91603. Call (925) 590-4289 and a live person answers, day or night, and we’ll schedule a technician who knows exactly what North Hollywood gates contend with: quake-shifted posts, heat-dome track binding, and 40-year-old operators that were never meant to last this long.
North Hollywood has a gate repair problem most cities don’t. The 1994 Northridge earthquake left thousands of concrete gate post footings with hairline fractures and slight shifts, and many were never properly re-set. That quarter-inch of movement from thirty years ago is why your rollers keep flattening, your drive gear keeps stripping, and no new motor ever seems to solve it. Our Gate Parts & Welding crew looks at the post first, not the operator. That single habit changes the outcome for a lot of North Hollywood gates.
Why Ironworks Gate Co. Is North Hollywood’s Preferred Gate Parts & Welding Company
We’ve been welding and rebuilding driveway gates since 1984, and the job in North Hollywood is different than anywhere else in the Valley. It’s not just the age of the buildings, though the 1960s-1980s dingbat apartments and courtyard complexes along the 91601 corridors keep us busy with original slide operators that have outlived three generations of tenants. It’s the ground underneath them. A veteran North Hollywood gate tech knows to probe the concrete gate post base for hairline quake fractures before assuming the opener is at fault, because a post that shifted even a quarter-inch in January 1994 and was never re-set will keep destroying rollers and stripping drive gears no matter how many times the operator is replaced.
Our technicians are background-checked and wear uniforms. They work the way they’d work in their own mother’s driveway. Every completed job, including every weld and every post replacement, is covered by our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right, no paperwork, no arguing. We also service nine gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule, and install North Hollywood Gate Motor & Opener systems, so the correct fix happens on the first visit, whatever is on the driveway. For North Hollywood, that means less time with a gate that won’t close on a busy NoHo Arts District evening.
Our Gate Parts & Welding Services in North Hollywood
Hinge Replacement
Wrought iron and tubular steel gates in North Hollywood’s courtyard complexes hang on hinges that have been carrying weight since the Nixon administration. When a hinge pin wears oval or a weld cracks at the barrel, the gate sags and drags. We cut the old hinge free, dress the post with a grinder, and weld the new one in true, so the gate swings without binding. If the post itself shows a quake-era lean, we address that before any hinge goes on, because a new hinge on a moving post is just a future callback.
Post Replacement
This is the job that separates a real gate specialist from a handyman. In North Hollywood, a gate post that leans or wobbles usually traces back to the 1994 Northridge quake, a shallow footing, or both. We saw through the old post, break out the compromised concrete, weld a new steel post onto a properly sized footing with fresh concrete, and re-hang the gate with corrected sag. For shared driveways between units, we sequence the work so the pedestrian entrance stays usable and the driveway stays open for fire access while the concrete cures.
Rail Repair
Slide gates are the default in North Hollywood because so many driveways and rights of way are too short for a swing gate to arc. That means heavy steel panels riding on rails and rollers that wear out. A heat dome summer above 105°F expands the steel track until it binds; a Santa Ana gust torques a misaligned panel off its bottom roller. We straighten bent rails, weld in replacement sections, re-set roller brackets, and tune the track so the gate moves with one hand when the opener is released. No grease-and-hope. We fix the cause.
Custom Welding
Not every fix is a part you can buy off a shelf. North Hollywood’s older courtyard gates often need a cracked top rail re-welded, a missing picket fabricated to match the original, or a bottom roller bracket re-engineered because the original design failed twice before. We weld in place with stick or MIG depending on the stock, dress the weld clean, and prime it so it doesn’t rust through before the next coat of paint. If the original gate has decorative scroll work, we match the style, not just the material.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
Our North Hollywood customers run a mix of aging DoorKing slide operators, LiftMaster swing arms, FAAC hydraulic rams, Elite slide motors, and the occasional Mighty Mule on a smaller pedestrian gate. We carry commonly needed rack, pinion, roller, and limit-switch parts stocked locally so a repair doesn’t drag into a second week. But the brand matters less than the diagnosis. A stripped plastic drive gear on a 1990s operator is straightforward. A stripped gear that keeps repeating is usually a sign the post or the track geometry changed underneath it, and that’s where welding and alignment come in before another part gets swapped.
Common Gate Parts & Welding Problems We See in North Hollywood Homes
- Stripped rack and pinion teeth on slide gates: The most frequent call in North Hollywood, and it’s almost never just the gear. Off-plumb post footings from the 1994 quake shift the gate’s travel line, putting uneven load on the rack. We re-align or re-set the post, then replace the gear so it doesn’t strip again in a year.
- Heat-dome track binding in summer: When it pushes past 105°F in the Valley, steel slide track grows long enough to pinch the gate’s rollers against the rail. We clearance the track for thermal expansion and replace rollers that have flat-spotted from the heat. A gate that binds in August will usually fail in February, when the rain hits.
- Sagging swing gates on shared driveways: North Hollywood’s tight shared rights of way mean swing gates catch wind when a Santa Ana gust hits. A misaligned panel torques off its bottom roller, the hinge welds crack, and the gate scrapes the concrete. We re-hang with corrected sag and weld fresh hinge barrels where needed, and we keep the pedestrian gate usable during the work.
- Cracked or rusted post bases at the concrete: A hairline fracture just above the footing is common on gates that were patched quickly after 1994 and never re-welded properly. Water gets in, rust swells, and the crack widens. We cut below the damage, weld in fresh post stock, and coat the joint so it isn’t a rust trap.
Pricing for Gate Parts & Welding in North Hollywood, CA
You’ll get a written price before we start. Always. Here’s what we typically see in North Hollywood: a hinge replacement on a standard driveway gate runs $180 to $420 installed, depending on hinge size and how much grinding the old welds need. Post replacement with a new concrete footing runs $600 to $1,400, and that includes cutting out the old concrete, setting and welding the new steel post, and re-hanging and aligning the gate. Rail repair and roller replacement on a slide gate runs $220 to $650. Custom welding is quoted by the repair, with most single-part fabrications landing between $150 and $600. What shifts the number is access: a shared driveway in 91602 where two cars are parked and the gate can’t come off its track adds time, but the price is still agreed before any work begins. Call (925) 590-4289 for an exact quote, free.
We Also Serve Cities Near North Hollywood
We serve the full Gate Parts & Welding needs of the Valley, from Studio City and Van Nuys east to Sun Valley and Burbank. If you’re near the North Hollywood border in any direction, call before you assume we’re too far. Same crew, same written pricing, same 90-Day Done Right Promise. See more on our Gate Parts & Welding page.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Hollywood
Because the failure is usually not in the operator at all. The 1994 Northridge quake shifted thousands of post footings in North Hollywood by a fraction of an inch, and a post that leans even slightly throws the gate’s travel line off-center. That means the rack and pinion mesh under uneven load, and a new LiftMaster or any other operator will strip its gear again until the post is re-set or the track is re-aligned. We check the post base first, before recommending any part replacement. Call (925) 590-4289 and we’ll diagnose it on site.
Yes. In most 91602 shared driveways and courtyard throughways, we set up a protected pedestrian path and keep at least the walk gate operational throughout a repair. For a sagging swing gate, we usually lift and support the panel, re-weld the hinge barrels or replace them, and re-hang the gate level the same day. The driveway may need to stay clear of vehicles for a few hours, but residents can still walk through. We’ll walk you through the exact sequencing before we begin.
Yes, and it’s something we’ve learned over decades of Valley summers. Steel slide track expands when North Hollywood pushes above 105°F, and if we weld rail sections or roller brackets without leaving a thermal gap, the gate will bind hard in August and the rollers will flat-spot. We clearance rails for expansion and choose roller materials that take the heat. It’s a small detail that saves a lot of August emergency calls.
Yes, UL 325 applies to any automated gate, regardless of age, and older 1980s-era North Hollywood apartment gates often lack proper entrapment sensors, photo eyes, or reverse-on-contact edges. If you’re a landlord or HOA in the NoHo Arts District, upgrading an old slide gate without addressing Gate Access Control - North Hollywood entrapment protection can be a real safety risk and a liability. Ask any gate company whether they will confirm the gate meets current UL 325 standards before touching the operator. We do, on every gate we open. Call (925) 590-4289 and we’ll inspect what’s there.
We can usually set a new steel post footing and have the gate re-hung and operational the same day, using high-early-strength concrete mixes and temporary support while the footing cures. In a tight North Hollywood driveway with a shared right of way, we’ll brace the post and keep the pedestrian gate open. The driveway may need to stay vehicle-free for 24 to 48 hours, but residents won’t be locked out or left with an unsecured entry. We’ll give you the exact plan in writing before we start.
Contact Ironworks Gate Co. for Gate Parts & Welding in North Hollywood
If your North Hollywood gate is sagging, stripping gears, or rusting through at the post base, call (925) 590-4289. A live person answers 24 hours a day, 7 days a week, not a voicemail tree. We’ll schedule a background-checked technician who knows North Hollywood’s post-quake post problems, heat-dome track issues, and shared-driveway access constraints. Every job is quoted and agreed before any work begins. We serve all of North Hollywood, including 91601, 91602, and 91603, and we stand behind every completed job with our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. Free estimates, senior and veteran discounts, and the last gate call you should ever need to make.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Hollywood with gate parts and welding craft since 1984.