Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hancock Park
A new driveway gate in Hancock Park typically costs between $4,800 and $18,000 installed, depending on the gate type, automation, and whether your property falls under HPOZ design review. Most single swing gate installs we complete run $5,500 to $9,500, while larger double gates and custom wrought iron work start around $12,000. We quote a firm price before any work begins, so the number on the invoice matches the number we shook hands on. Call (925) 590-4289 for a free estimate from a company that has been doing this work since 1984.
Why Ironworks Gate Co. Is Hancock Park’s Preferred Gate Installation Company
Hancock Park is not like other Los Angeles neighborhoods. The homes along South Muirfield Road, June Street, and McCadden Place were built between 1920 and 1945, and many still carry their original ornamental wrought iron gates. Those gates were forged by hand, hung on brick pilasters, and never designed for electric operators. So when we send a technician for Gate Repair - Hancock Park, we send someone who knows the difference between a 1930s French Norman estate gate and a 2000s track home panel. That matters more than most companies admit.
We have worked on revival-style estates from Rossmore Avenue to Hudson Avenue, and we know what the HPOZ board looks for when reviewing a gate replacement on a contributing property. Our crews arrive in uniform, background-checked, and we arrive when we say. Victor Salinas, who leads our team, has spent years focused on older gates and legacy operators, and he trains every technician to look at the post before the motor. That is the difference between a gate that works for two years and one that works for twenty.
We answer the phone 24 hours a day, seven days a week. A live person. Not a voicemail tree. If you call about a gate that will not close or a post that is leaning, you will speak to a human who can schedule a visit to Hancock Park, usually within one business day for estimates and same-day for urgent failures. And every job, every single one, carries our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Our Gate Installation Services in Hancock Park
Driveway Gate Installation
Driveway gates in Hancock Park are not off-the-shelf items. The wide motor courts and deep setbacks on properties along Wilshire Country Club mean most driveways need custom sizing, heavier gauge steel, and operators rated for gates that weigh 800 pounds or more. We measure, fabricate, and install driveway gates that match the architectural language of the house, whether that is Spanish Colonial, Tudor, or French Norman. And we handle the HPOZ paperwork on contributing properties so the review does not stall your project.
Pedestrian Gate Installation
Pedestrian gates on Hancock Park estates get used more than the driveway gate, which means their hinges wear faster and their latches fail sooner. We install pedestrian gates built from the same material and finish as the driveway gate, with heavy-duty self-closing hinges and keypad or intercom entry. If you have a service entrance off the alley or a garden gate along the side yard, we fit those too. The goal is a gate that matches the property and still works a decade later.
Sliding Gate Installation
Sliding gates are common on Hancock Park homes where the driveway slopes or the setback is too short for a swing gate to open inward. We install rack-and-pinion slide gates with covered tracks, safety photocells, and UL 325 compliant operators. The clay-heavy soil in Hancock Park moves every winter, so we pour post footings deeper than standard and set the rack with room for adjustment. A slide gate that jumps its track every spring was almost always installed on footings too shallow for this soil.
Swing Gate Installation
Double swing gates are the signature entry on many Hancock Park estates, and they demand the most care. Two hanging leaves, two hinge posts, two operators, and a center latch all have to be square to each other, or the gate binds and the operators burn out. We install swing gates with reinforced post brackets, inline operators where the architecture allows, and safety loops and photocells as standard. On original brick pilasters, we inspect for hidden cracking before we mount anything, because the post, not the motor, is usually the real failure point.
Security Gate Installation
A security gate on a Hancock Park property has to do more than close. It needs to close behind you reliably, resist a determined push, and integrate with whatever access system you use, whether that is a keypad, telephone entry, or vehicle loop detector. We build security gates from heavier steel than standard decorative gates, with concealed hinges and tamper-resistant hardware. Every security gate we install includes UL 325 entrapment protection and is tested with the operator before we leave. We also retrofit existing ornamental gates with modern safety sensors and Hancock Park Gate Access Control, so you do not have to sacrifice the original ironwork to get a gate that actually protects the property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hancock Park
We are trained and equipped to service nine gate automation brands, and on Hancock Park estates we see a lot of BFT, Linear, and Viking operators on legacy installs. The 1990s and 2000s retrofit boom put a lot of those units on gates that are now twenty-five years old, and the control boards are reaching the end of their life. We stock Gate Parts & Welding - Hancock Park for these brands locally, so we can usually restore a dead operator the same visit. If the operator is beyond saving, we will tell you straight and quote a replacement before we touch a single wire.
Common Gate Installation Problems We See in Hancock Park Homes
- Brick pilaster cracking under motorized load. Original 1930s brick posts were never engineered for the repetitive torque of a swing gate operator. We see hairline cracks at the base that spread, and once the post shifts, the gate sags and the operator arm binds. The fix starts with the footing, not the motor.
- Clay soil heave throwing gates out of square. Hancock Park sits on expansive clay. Every winter the soil swells, every summer it contracts, and over a few years a gate that was hung square drifts out of alignment. Latches stop hitting, tracks jam, and operators overheat. We re-set post footings deeper than original specifications to stop the cycle.
- Obsolete control boards lacking entrapment protection. Many 1990s operators in Hancock Park were installed before UL 325 safety standards became mandatory. We regularly find safety photocells bypassed or never installed at all. That is a serious hazard, especially on a property with children, pets, or deliveries. We replace the board and install proper sensors on every job we touch.
- Santa Ana wind stress on heavy ornamental gates. October through December, Santa Ana winds push hard against wrought iron gates that weigh hundreds of pounds. Hinges that were fine for fifty years of manual use fail quickly under wind load and electric operation. We reinforce hinge mounts and use hardened pins rated for the weight.
Pricing for Gate Installation in Hancock Park, CA
Here is what we quote for Hancock Park work in 2025. A single swing driveway gate with one operator, safety sensors, and standard steel construction runs $5,500 to $9,500. A double swing gate, which is what most Hancock Park estates need, runs $9,000 to $16,000 depending on width, ironwork detail, and whether you select a custom forged design. Sliding gates run $7,500 to $14,000 with track, rack, and operator included. A pedestrian gate with keypad entry starts around $2,800. Custom ornamental wrought iron matching the original 1920s character can push a project above $20,000, and HPOZ review may add four to eight weeks to the timeline. Whatever the number, we quote it in writing before any work begins, and the invoice matches the quote. Call (925) 590-4289 for a free, itemized estimate.
We Also Serve Cities Near Hancock Park
Our Gate Installation team works throughout the surrounding area, including Sherman Oaks, Van Nuys, Encino, and Studio City. If you live just outside Hancock Park but your property has the same vintage character and the same soil conditions, you will get the same care. This page covers Gate Installation in Hancock Park specifically, but our crews are local to the entire Mid-Wilshire and Valley corridor.
Serving Hancock Park, CA - Our Local Coverage Area
We’re based in the Hancock Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hancock Park
Most original wrought iron gates can be retrofitted, provided the hinges, hinge posts, and the gate itself are structurally sound. We restore the ironwork, reinforce or replace the hinge pins, and mount a modern operator with UL 325 safety sensors onto the existing gate. Replacement only makes sense when the gate has rusted through or the hinge posts have failed beyond repair. Call (925) 590-4289 and we will assess yours honestly.
For a contributing property in the Hancock Park Historic Preservation Overlay Zone, any new gate visible from the street must pass design review with the HPOZ board, which means the gate must match the original architectural character, scale, and material of the 1920s to 1940s home. Modern aluminum panel gates are frequently rejected. We prepare the drawings, handle the review, and build the gate to the approved design. Learn more in our Gate Installation guide, or call us at (925) 590-4289 and we will walk you through the process.
Because the clay soil under the hinge post heaves during the wet winter months, pushing the post out of square, and the gate starts binding on the operator arm. This is the single most common issue we see in Hancock Park, and the permanent fix is re-setting the post footing deeper than the original installation. Call (925) 590-4289 and we will dig it out and re-pour it properly.
Yes, a solar operator is often the cleanest solution for an original estate gate where running conduit would mean trenching through mature landscaping or hardscape. Solar units from brands like Ghost Controls and Viking work well on single swing gates with good southern exposure. We size the panel to the gate weight and duty cycle, and we mount the battery box discreetly on the post or inside the property line. Give us a call at (925) 590-4289 and we will tell you if solar is right for your gate.
Shallow post footings. The clay soil in Hancock Park expands and contracts through the wet and dry seasons, and a rack-and-pinion slide gate that was set on footings poured to standard depth will jump its track by the following spring. We pour deeper footings and set the rack with seasonal adjustment built in, which is why our slide gate installs stay on their tracks. If yours has jumped, call (925) 590-4289 and we will inspect the footings first.
The $50 discount applies to repair work over $250, not to new installations. For new gates we offer a free, itemized written estimate, and our standing 5% senior and veteran discount applies to installation as well. If you have a written estimate from another company, we will provide a free second opinion. Call (925) 590-4289 and we will come out and measure, no charge.
Call Ironworks Gate Co. for Gate Installation in Hancock Park
We have poured post footings on South Muirfield Road, re-hung original ironwork on June Street, and installed operators on estates that were built before electric gates existed. We know this neighborhood, we know its HPOZ, and we know its soil. If you are ready for a gate that is done right and backed in writing, call (925) 590-4289 today. A live person will answer, and your estimate is free. Done right, and backed in writing. That is the Keystone Standard, on every job, in every part of Hancock Park.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Hancock Park since 1984.